EVALUASI KINERJA ISOLASI DAN PARAMETER LISTRIK PADA CAPACITIVE VOLTAGE TRANSFORMER (CVT) DI BAY TANJUNG 2 GARDU INDUK 150 KV SWITCHING

Anur Ramadhan; Agung Budi Muljono

doi:10.23960/jitet.v13i3S1.7954

Authors

Anur Ramadhan Jurusan Teknik Elektro, Universitas Mataram
Agung Budi Muljono Jurusan Teknik Elektro, Universitas Mataram

DOI:

https://doi.org/10.23960/jitet.v13i3S1.7954

Abstract Views: 101 File Views: 49

Keywords:

Capacitive Voltage Transformer (CVT), Tahanan Isolasi, Tan Delta, Kapasitansi, Shutdown Measurement

Abstract

One of the important components in a substation is the Capacitive Voltage Transformer (CVT). Maintenance is one of the activities aimed at keeping equipment in optimal condition to ensure it performs its functions reliably. One type of maintenance is shutdown measurement. This study examines insulation resistance, tan delta, and capacitance of the CVT equipment at Bay Tanjung 2 of the 150 kV Switching Substation. The insulation resistance test refers to the Decree of the Board of Directors of PT.PLN (Persero) No. 0520-2.K/DIR/2014 Transformer Maintenance Manual, which is based on the VDE standard. The tan delta and capacitance tests refer to the IEC 60044-5 standard “Instrument Transformers Part-5,” First Edition, 2004.The results of the CVT insulation resistance tests for phase R were 1.96 GΩ, 2.06 GΩ, 2.24 GΩ, 323 MΩ, 450 MΩ, and 948 MΩ. For phase S, the results were 14 GΩ, 16.71 GΩ, 19.56 GΩ, 496 MΩ, 252 MΩ, and 826 MΩ. For phase T, the results were 19.48 GΩ, 17.2 GΩ, 8.76 GΩ, 1.13 GΩ, 2.46 GΩ, and 2.5 GΩ. The tan delta test results for phases R, S, and T were 0.683%, 0.69%, and 0.701%. The capacitance test results for phases R, S, and T were 4446 pF, 4439 pF, and 4447 pF, respectively.

Downloads

Download data is not yet available.

References

Rahmat Hasrul, “Studi Kelayakan Peralatan Voltage Transformator 150 kV Gardu Induk Tengkawang,” Pros. Snitt Poltekba, no. 0520, pp. 71–78, 2023, [Online]. Available: https://jurnal.poltekba.ac.id/index.php/prosiding/article/view/1951

S. R. Pertiwi, U. Latifa, R. Hidayat, and I. Ibrahim, “Analisis Kelayakan CVT (Capacitive Voltage Transformer) Phasa S Bay Busbar 2 150 kV di GI PT. XYZ Indonesia,” Techné J. Ilm. Elektrotek., vol. 20, no. 1, pp. 35–42, 2021, doi: 10.31358/techne.v20i1.259.

R. R. A. Saputra Dwi, “Pengujian Tahanan Isolasi Capasitive Voltage,” J. POLEKTRO J. Power Elektron., vol. 11, no. 2, pp. 209–212, 2022.

Y. S. Handayani, Z. A. Sa’adah, M. Arfan, and I. Priyadi, “Pengujian Tahanan Isolasi pada Capacitive Voltage Transformer (CVT) di Bay Penghantar Tes 1/70 kV PT PLN (Persero) ULTG/GI Pekalongan,” Appl. Eng. Innov. Technol., vol. 1, no. 2, pp. 88–94, 2024, doi: 10.62777/aeit.v1i2.37.

E. Yulianto, A. Sofwan, and J. Windarta, “Metode Pemilihan Tindak Lanjut Pemeliharaan Pemutus Tegangan ( PMT ) 150 kV Berdasarkan Nilai Condition Assesment Factor ( CAF ) dan Certainty Level ( CL ),” J. Profesi Ins. Indones., vol. 2, no. 4, pp. 238–242, 2024.

C. P. Maharani, I. M. A. Nrartha, S. I. Nugroho, and A. Hasibuan, “Pengujian Tegangan Tembus Minyak Trafo Pada Bay Trafo 1 Di GI 150 kV Tanjung,” J. Inform. dan Tek. Elektro Terap., vol. 12, no. 3, 2024, doi: 10.23960/jitet.v12i3.4347.

Y. A. Saputra et al., “Analisa Tahanan Kontak Pemisah (PMS) 150 kV Busbar B Bay Kopel di Gardu Induk Maligi,” J. Inform. dan Tek. Elektro Terap., vol. 13, no. 3, pp. 2182–2186, 2025, doi: http://dx.doi.org/10.23960/jitet.v13i3.6769.

P. Situmorang, Environmental and Social Management Plan Monitoring Report 2023, no. May 2019. PT PLN (Persero) UID Bali, 2022.

T. Rusdjaja, C. Yani, A. Salam, I. Puspanugraha, and R. Siregar, Buku Pedoman Pemeliharaan Trafo Arus (CT), no. 3. PT PLN (Persero) No.0309.K/DIR/2013, 2020.

I. M. Djodding and A. Rasyid, “Analisis Pengujian Shutdown Measurement Transformator Arus 150 kV Pada Gardu Induk Tello,” Kohesi J. Multidisiplin Saintek, vol. 2, no. 7, pp. 102–131, 2024.

Menteri ESDM, “Peraturan Menteri Energi dan Sumber Daya Mineral Republik Indonesia Nomor 20 Tahun 2020 Aturan Jaringan Sistem Tenaga Listrik (Grid Code),” Peratur. menteri ESDM, no. 3, pp. 417–607, 2020.

S. Imammah and M. I. Marzuki, “Implementasi Strategi Pemeliharaan Preventif untuk Mengoptimalkan Kinerja Disconnecting Switch Line dan Lightning Arrester pada Gardu Induk 150kV,” JSI J. Sist. Inf., vol. 15, no. 1, pp. 3060–3079, 2023, doi: 10.18495/jsi.v15i1.108.

M. Agung Suardi, “Analisis Tiga Level Inspeksi Peralatan Lightning Arrester Sebagai Pengaman Pada Unit Layanan Transmisi Dan Gardu Induk Tengkawang,” Pros. SNITT POLTEKBA, pp. 48–54, 2023, [Online]. Available: https://jurnal.poltekba.ac.id/index.php/prosiding/index

T. Prasetyo, “Analisis Pemeliharaan Tiga Level Inspeksi Lightning Arrester Bay Jajar 2 Di Gardu Induk 150 kV Gondangrejo,” 2021.

H. R. Febrijanto and R. Hidayat, “Analisis Pengujian Tan Delta Pada Transformator Arus Di Gitet Tasikmalaya Bay Penghantar Bandung Selatan-1,” Teknokom, vol. 6, no. 2, pp. 86–95, 2022, doi: 10.31943/teknokom.v6i2.143.

A. Salam, I. Puspanugraha, R. Siregar, M. Ferdian, and T. Rusdjaja, Buku Pedoman Pemeliharaan Transformator Tegangan (CVT) - PT PLN (Persero) No. 0520-2.K/DIR/2014. PT PLN (Persero), 2014.