OPTIMIZING AIR PRESSURE TO IMPROVE THE EFFICIENCY OF BOTTLE AND CAN WASTE PRESSING ON PNEUMATIC MACHINES
DOI:
https://doi.org/10.23960/jitet.v13i3S1.7491Abstract Views: 90 File Views: 35
Keywords:
Air pressure; pneumatic compactor machine; waste compaction; automation; energy efficiencyAbstract
Abstract. The issue of plastic bottle and can waste continues to grow alongside increasing consumption, necessitating efficient waste management solutions. This study aims to optimize air pressure in a pneumatic-based waste compactor to improve the efficiency of compressing bottles and cans. An experimental method was employed, varying air pressure (6, 7, and 8 bar) and pressing time (10, 20, and 30 seconds). The results show that a combination of 8 bar pressure and 30 seconds pressing time yields optimal compaction, reducing can volume by up to 70,75% and plastic bottle volume by up to 62,87% of their initial sizes. The PLC and sensor-based automation system significantly enhances process efficiency and reliability. These findings highlight the importance of proper air pressure adjustment for energy efficiency, effective compaction, and tool longevity, making this pneumatic machine highly promising for sustainable inorganic waste management.
Downloads
References
Abdul Tahir dan Musakirawati, “Rancang Bangun Mesin Pres Sampah Botol Plastik Dengan Sistem Ulir Dan Pengendali Arduino”, Jurnal Ilmiah Indonesia, vol. 7, no. 3, Maret 3, 2022, https://jurnal.syntaxliterate.co.id/index.php/syntax-literate/article/download/6457/3767/
Ali Rosyidin, “Rancang Bangun Alat Simolator Pneumatic Dua Silinder Katup Selenoid Tunggal”, Jurnal Teknik, vol. 8, no. 2, Des. 2019, http://dx.doi.org/10.31000/jt.v8i2.1452
Amrulloh Maiaghy, “Desain Dan Simulasi Mesin Pres Botol Kaleng Menggunakan Pneumatik Berbasis Autodesk Inventor”, Laporan Akhir Universitas Tidar, April 21, 2022, https://repositori.untidar.ac.id/index.php?p=fstream-pdf&fid=35416&bid=11204
Ari Kurniawan dan Hilda Porawati, “Sistem Elektro Pneumatik Modul PLC 3 Silinder Kerja Ganda Gerak Berlawanan”, Jurnal Inovator, vol. 1, no. 1, 2018, https://ojs.politeknikjambi.ac.id/index.php/inovator/article/download/131/77
Ghoni Musyahar, Nicholis Satria Pratama, dan M. Hammam, “Rancang Bangun Trainer Kendali Pneumatik Berbasis PLC CPM1A 40CDR_A Sebagai Media Pembelajaran Di PT SUKORINTEX”, Jurnal UMPP, vol. 5, no. 2, Agustus 2020, https://jurnal.umpp.ac.id/index.php/cahaya_bagaskara/article/download/1062/794
Hadimi, S.T., M.T., “Sistem Kontrol Pneumatik”, Kota Solok, Sumatera Barat, Kode pos 27312, 2024, https://repository.um.ac.id/5473/1/Sistem%20Kontrol%20Pneumatik_edited_compressed.pdf
Husnul Huluk, “Menentukan Pneumatik dalam Perancangan Mesin Press Conblok dengan beban 250 Kg”, Jurnal ReTiMs, vol. 5, no. 1, Mei 2023, DOI: 10.32897/retims.2023.5.1.2055 atau https://jurnal.usbypkp.ac.id/index.php/ReTIMS/article/download/2055/766
Ibnu Sajub Raja, “Modifikasi Mesin Pres Pneumatik Menggunakan Alat Ukur Semi Otomatis”, Repository UNIFA, Des. 22, 2022, https://repository.unifa.ac.id/id/eprint/1888/1/IBNU%20SAJUB%20RAJA%20MES22.pdf
Ichsan Ristiawan dan Muhammad Naim, “Rancang Bangun Mesin Press Sampah Botol Plastik Kemasan Minuman”, Jurnal Ilmiah Teknik Mesin, vol. 10, no. 1, Feb. 2022. https://doi.org/10.33558/jitm.v10i1.2855
Industrial Automation and Robotic Solutions, “”Mengenal Sistem Pneumatic, Komponen, Hingga Kegunaannya”, Misel.co.id, Juni 9, 2025 [Online.], Available : https://misel.co.id/mengenal-sistem-pneumatic-komponen-hingga-kegunaannya/
Kusuma Wahyu Wijaya, Marno, dan Iman Dirja, “Pembuatan dan Pengujian Mesin Press Sampah Untuk Pembangkit Listrik Tenaga Sampah (PLTSA) Di Kampus UNSIKA”, Jurnal Serambi Engineering, vol. 9, no. 4, Okt. 2024, https://jse.serambimekkah.id/index.php/jse/article/view/354/338
M. Nurdiansyah, Saparin, dan Yudi Setiawan, “Rancang Bangun Mesin Pencacah Sampah Organik” MACHINERY, vol. 4, no. 2, Juni 2023, https://doi.org/10.5281/zenodo.8048925
Moliza, Azhar, dan Supri Hardi, “Rancang Bangun Sistem Pengepresan Kaleng Minuman Otomatis Menggunakan Aktuator Pneumatik Berbasis Arduino Uno”, JURNAL ELEKTRO, vol. 3 ,no. 1, Mar. 2019, https://e-jurnal.pnl.ac.id/TEKTRO/article/download/1546/1287
Muhammad Rizki Fazryansyah, dkk “Sistem Klasifikasi Sampah Organik Dan Non Organik Menggunakan CNN Berbasis Framework Flask”, JITET, Vol. 13, No. 3, Juni, 14 2025 ,pp. 207, http://dx.doi.org/10.23960/jitet.v13i3.6706
Nurul Huda dan Agustiawan, “Alat Pres Kaleng Alumunium Berbasis STMicroelectronic”, Seminar Nasional Industri dan Teknologi (SNIT), Nov. 2024, pp. 155 – 156, https://snit-polbeng.org/eprosiding/index.php/snit/article/download/651/447/
Qadir Sadri, Usman, dan Ismi Amalia, “Rancang Bangun Alat Mesin Press Kaleng Minuman Tenaga Pneumatik”, Jurnal Mesin Sains Terapan, vol. 6 no. 1, Feb. 2022, https://e-jurnal.pnl.ac.id/mesinsainsterapan/article/download/2856/2416
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Jurnal Informatika dan Teknik Elektro Terapan
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
