ANALISIS DROP TEGANGAN SAAT MANUVER JARINGAN PADA PENYULANG SYG01 DAN SYG09 MENGGUNAKAN SIMULASI SOFTWARE ETAP 12.6.0

Rayfaldi Ananda An-Naafi

doi:10.23960/jitet.v13i3.6809

Authors

Rayfaldi Ananda An-Naafi Universitas Negeri Semarang

DOI:

https://doi.org/10.23960/jitet.v13i3.6809

Abstract Views: 56 File Views: 51

Keywords:

Voltage Drop; Network Maneuver; ETAP Software.

Abstract

The provision of stable and efficient electricity is highly dependent on quality management in power distribution, one of which is conducting Voltage Drop and Network Maneuver analysis. Voltage drop is a decrease in voltage that occurs when electric current flows in a conductor or electrical component. This is caused by several things, including the internal resistance of the conductor. In the SYG01 feeder, voltage drops often occur due to electrical disturbances, overloads, or cables that are too long. The purpose of this study is to analyze the factors that affect voltage drops in the distribution network as well as network maneuvers and the addition of taps as a solution to reduce the impact of voltage drops when network disturbances occur. By simulating it through ETAP software, it is expected to be able to obtain comparative results before and after network maneuvers with appropriate results.

Downloads

Download data is not yet available.

References

T. Wiji Nugroho, I. Mustaqim, and A. Sandria Jaya Wardhana, “Studi kualitas daya listrik (power quality) di bangunan gedung xyz,” vol. 13, no. 2, 2025.

A. Purnomo Putro and B. Winardi, “Analisis Tegangan Jatuh Sistem Distribusi Listrik Kabupaten Pelalawan Dengan Menggunakan Etap 7.5.0,” Transient J. Ilm. Tek. Elektro, vol. 4, no. 1, pp. 122–127, 2015, [Online]. Available: https://ejournal3.undip.ac.id/index.php/transient/article/view/8800

M. I. Fardiansyah, “Studi Pembangunan Penyulang Kds18 Untuk Memperbaiki Kualitas Tegangan Dan Susut Daya Jaringan 20 Kv Dengan Menggunakan …,” 2021, [Online]. Available: http://repository.unissula.ac.id/24023/

S. Aryza, P. P. Budi, and S. Utara, “A RELIABILITY IMPROVEMENT OF MANAGEMENT DISTRIBUTION,” vol. 12, no. 01, pp. 1753–1758, 2023.

D. A. Maulana and D. Nugroho, “ANALISA SUSUT DAYA DAN Drop Tegangan TERHADAP JARINGAN TEGANGAN MENENGAH 20KV PADA GARDU INDUK PANDEAN LAMPER SEMARANG,” pp. 382–389, 2019.

N. Hidayah and A. Budi Muljono, “ANALISIS MANUVER JARINGAN TERHADAP KEANDALAN KONTINUITAS PENYALURAN TENAGA LISTRIK PENYULANG DI AREA AMPENAN [Analysis of Network Maneuvers Toward Continuity Reliability of Feeders Electric Power Transmission in Ampenan Area],” vol. 3, no. 1, pp. 109–115, 2014.

A. K. Ode, “Analisa Penyulang BTL07 Terhadap Manuver Backup Jaringan Distribusi 20 kV Batulicin,” 2022, [Online]. Available: http://eprints.uniska-bjm.ac.id/10478/%0Ahttp://eprints.uniska-bjm.ac.id/10478/1/Artikel Alif Karnandi Ode 18650020.pdf

Syaifudin dkk., “Analisa Perhitungan Drop Voltage Penyulang Jepara 10 Dengan Pelimpahan Jaringan Ke Penyulang Jepara 05 Menggunakan ETAP 12.6,” Pros. Konstelasi Ilm. …, p. 8, 2019, [Online]. Available: http://jurnal.unissula.ac.id/index.php/kimueng/article/view/8626%0Ahttp://jurnal.unissula.ac.id/index.php/kimueng/article/viewFile/8626/3982

Dedi Makmur, “Simulasi Optimasi Penempatan Kapasitor Bank Untuk Perbaikan Drop Tegangan Pada Feeder Bumiayu 07 Dengan ETAP,” Simulasi Optimasi Penempatan Kapasitor Bank Untuk Perbaikan Drop Tegangan Pada Feed. Bumiayu 07 Dengan ETAP, p. 1, 2022.

Tim Penyusun, “Standar Konstruksi Jaringan Tegangan Menengah Tenaga Listrik,” PT. PLN, pp. 3–4, 2010.

B. C. Truong et al., “Applications of the Newton-Raphson method in decision sciences and education,” Adv. Decis. Sci., vol. 23, no. 4, 2019, doi: 10.47654/v23y2019i4p52-80.

A. G. Nigara and Y. Primadiyono, “Analisis Aliran Daya Sistem Tenaga Listrik pada Bagian Texturizing di PT Asia Pasific Fibers Tbk Kendal menggunakan Software ETAP Power Station 4.0,” J. Tek. Elektro, vol. 7, no. 1, pp. 7–10, 2015.