RANCANG BANGUN SISTEM KENDALI OTOMATIS DAN MONITORING SUHU DAN KELEMBAPAN PADA RUMAH BURUNG WALET BERBASIS BLYNK
DOI:
https://doi.org/10.23960/jitet.v12i2.4216Abstract Views: 503 File Views: 450 File Views: 0
Abstract
Swallow's nest currently has a high economic value. Swallow's nest is made of swallow's saliva in the shape of a bowl. Swallow nests are naturally formed in caves or buildings that are quite humid with dim to dark lighting. This bird's nest is attached to the ceiling which is generally used by swallows as a place to rest and breed. This system uses ESP32 as a microcontroller that will control the mistmaker through a relay module, process and send the reading data from the BME280 sensor to the monitoring system with the blynk application. The type of mistmaker used to control environmental conditions in the swallow house is AUDAX AXH-5500. This system will maintain temperature conditions in the range of 26 - 29 ºC and humidity in the range of 80 - 90% RH. Mistmaker will be turned on if the temperature > 29 ºC or humidity < 80% RH and will be turned off when the temperature < 26 ºC or humidity above 90% RH. The test results of this study are the average temperature in the swallow house during the use of this tool is 28.17 ºC and humidity 84.24% RH.Downloads
References
Dewi, Mega Endiana. (2020). Manfaat Konsumsi Burung Walet. Jurnal Kedokteran Ibnu Nafis, 9(1), 12-16.
Putriyani, H., Fitrianingsih, S. P., & Yuniarni U. (2022). Studi Literatur Potensi Sediaan Topikal Sarang Burung Walet (Aerodramus fuciphagus) sebagai Penyembuh Luka. Bandung Conference Series: Pharmacy, 2(2), 1-4.
Zamahuri, A., Zakaria, N. M., & Hadiwiyatno. (2019). Sistem Pengendalian Otomatis Pada Budidaya Sarang Burung Walet Menggunakan Internet of Things. Jurnal Jartel, 9(4), 431-435.
Ningsih, T. P., Tadjuddin, & Indrawan A. W. (2021). Rancang Bangun Sistem Kontrol Suhu dan Kelembapan Sarang Burung Walet Berbasis Internet of Things. Prosiding Seminar Nasional Teknik Elektro dan Informatika (SNTEI) 2021.
Ariandi, M., Alvinser, J. (2023). Prototipe Sistem Monitoring Walet Berbasis IoT. Jurnal Media Informatika Budidarma, 7(2), 920-927.
Rinaldi, Marwan. (2022). Rancangan Bangun Sistem Monitoring Dan Kontrol Pada Rumah Walet Berbasis Internet of Things (IoT). Perpustakaan UBT: Universitas Borneo Tarakan.
Suryana, T. (2022). Membangun Stasiun Cuaca dengan BME280 Untuk Monitoring Suhu, Kelembapan, Tekanan Udara, dan Ketinggian. Universitas Komputer Indonesia: Bandung.
Chayaning, M. W., Anshori, I. (2022). Strategi Pemasang Burung Walet Di Lamongan Melalui Karaketeristik Kerja. Jurnal Bisnis Terapan, 6(1), 53-62.
Putri, M. (2021). Pengaruh Sistem Monitoring Dan Pengendalian Terhadap Kinerja Pegawai Pada Kantor Bupati Jeneponto. Universitas Muhammadiyah Makassar.
Yudhanto, Y., Azis, A. (2019). Pengantar Teknologi Internet of Things (IoT). UNS Press: Surakarta.
Wardhana, A. (2023). Arsitektur Dan Standarisasi Internet of Things (IoT). Media Sains Indonesia: Jawa Barat.
Muliadi, M., Imran, A., & Nasrul, M. (2020). Pengembangan Tempat Sampah Pintar Menggunakan ESP32. Jurnal Media Elektrik. 17(2), 73-79.
Djuandi, F. (2011). Pengenalan Arduino. Elexmedia: Jakarta.
Putra, R. W., & Suryamen, H. (2019). Sistem Monitoring Tanah Longsor Berbasis Internet of Things dan Geographic Information System. JITCE (Journal of Information Technology and Computer Engineering), 3(2), 70-77.
Rokhmah, N.N. (2018). Kendali Kecepatan Motor DC Dengan Metodi PID Berbasis Arduino Uno. Jurnal Teknik Elektro dan Vaksional, 6(1), 187-198.
Hansza, R., & Haryudo, S. I. (2020). Rancang Bangun Kontrol Motor DC Dengan PID Menggunakan Perintah Suara Dan Monitoring Berbasis Internet of Things. Jurnal Teknik Elektro, 9(2), 477-485.
