SISTEM KENDALI SUHU PADA PENGERINGAN ECENG GONDOK BERBASIS HMI

Hanif Dwi Rahmansyah

doi:10.23960/jitet.v12i1.3969

Hanif Dwi Rahmansyah
Universitas Tidar

DOI: https://doi.org/10.23960/jitet.v12i1.3969

Abstract Views (Last 12 Months)

676 Abstract Views

576 Downloads

Abstract

Water hyacinth (Eichornia crassipes) is a water weed that has a harmful impact on the aquatic ecosystem. It has a high nutrient content, including 4.08% crude fiber, 3.55% crude protein, 8.22% carbohydrates, and 3.93% ash. Because of these contents, water hyacinth is suitable as fish food. One potential technology that can be develop from existing research to address this issue is a temperature control system for water hyacinth. This system would utilize an Outseal Nano processor with a Human Machine Interface (HMI) and a PID controller based on the Ziegler-Nichols method. Drying would occur at 60°C and 75°C for 60 minutes. Research findings with parameters Kp = 6.25; Ki = 58.5; and Kd = 0.3 indicate that the system response has a rise time of 0.0988s, a settling time of 0.4280s, and an overshoot of 12.5224%. At a drying temperature of 60°C for 60 minutes, the water hyacinth reaches a dryness of 63.3%, while at a temperature of 75°C for 60 minutes, it reaches a dryness of 70%. This research has proven that using PID control produces a more effective system.

Downloads

Download data is not yet available.

References

P. Ramlan dan M. A. Indrianti, “ANALISA POTENSI ECENG GONDOK (Eichhornia crassipes ) DANAU LIMBOTO SEBAGAI PAKAN TERNAK,” 2018.

A. N. Putra, S. Ristianti, Musfiroh, dan M. B. Syamsunarno, “PEMANFAATAN ECENG GONDOK (Eichornia Crassipes) SEBAGAI PAKAN IKAN NILA: EFEK TERHADAP PERTUMBUHAN DAN KECERNAAN PAKAN,” Journal of Local Food Security, vol. 1, hlm. 77–82, 2020.

I. Saputro dan A. Fahruzi, “Rancang Bangun Oven Drying Sebagai Alat Pengering Eceng Gondok pada Suhu Rendah Menggunakan Metode PID,” Seminar Nasional Sains dan Teknologi Terapan IX, hlm. 189–196, Jun 2021, doi: 10.31284/p.snestik.2021.1789.

Raaini, I. S. Nasution, dan Devianti, “Performance Monitoring of Greenhouse for Drying Water Hyacinth (Eichhornia Crassipes) Based on Arduino Nano Atmega328 Microcontroller,” Ilmiah Mahasiswa Pertanian, vol. 7, no. 4, Nov 2022, [Daring]. Tersedia pada: www.jim.unsyiah.ac.id/JFP

W. S. Alfira dan K. Riyadi, “KELAYAKAN PLC OUTSEAL PADA PENGONTROLAN MOTOR INDUKSI 3 FASA,” Makassar, 2022.

R. Choerudin, “DESAIN SISTEM KENDALI TEMPERATUR PADA ALAT STERILISATOR DEPIROGENASI (STERILISASI PANAS KERING) MENGGUNAKAN PID,” Universitas Semarang, Semarang, 2021.

Q. Wang, G. Wang, X. Xie, dan L. Zhou, “Design and Simulation for Temperature Measurement and Control System Based on PT100,” IEEE 4th Advanced Information Technology, Electronic and Automation Control, hlm. 2301–2304, 2019, doi: 10.1109/IAEAC47372.2019.8997936.

K. Zaruska dan M. Azhari, “RANCANG BANGUN SISTEM STABILISASI SUHU PENGGORENGAN DENGAN METODE FUZZY BERBASIS IOT,” POLITEKNIK MANUFAKTUR NEGERI BANGKA BELITUNG, Bangka Belitung, 2022.

Katsuhiko. Ogata, Modern Control Engineering, vol. Fifth Edition. Prentice-Hall, 2010.

K. Agung Syahputra, F. R. A Bukit, dan Suherman, “PERANCANGAN HMI (HUMAN MACHINE INTERFACE) SEBAGAI PENGONTROL DAN PENDETEKSI DINI KERUSAKAN KAPASITOR BANK BERBASIS PLC,” JOURNAL OF ENERGY AND ELECTRICAL ENGINEERING (JEEE), vol. 101, no. 2, Apr 2022.

L. Whisnu Bramantyo, A. Sandi Panorama, dan R. Junaidi, “PROTOTYPE SISTEM CONTROL SUHU DENGAN METODE PID PADA TRAY DRYER MIE JAGUNG HI-CALCIUM PROTOTYPE OF TEMPERATURE CONTROLLING SYSTEM WITH PID METHOD IN MAKING HIGH POTASSIUM MAIZE NOODLE USING TRAY DRYER,” Politeknik Negeri Sriwijaya, vol. 01, no. 01, hlm. 72–76, Okt 2020.

G. A. Salamena dan V. Salamena, “ANALISIS PENENTUAN KONSTANTA PENGENDALI PID MENGGUNAKAN GARIS SINGGUNG METODE ZIEGLER-NICHOLS I PADA TITIK KOORDINAT KURVA TANGGAPAN KELUARAN PLANT,” Jurnal Simetrik, vol. 10, no. 2, 2020.

N. Hamid dan A. Mansur, “Penalaan Parameter PID dengan Metode Ziegler-Nichols untuk Optimasi Kontrol Kecepatan Motor pada Alat Spin Coater,” Prosiding Seminar Nasional Teknik Elektro dan Informatika (SNTEI), hlm. 315–319, Sep 2021.