DESAIN MODUL SWITCH SELECTOR UNTUK PENGGUNAAN REMOTE CONTROL PADA MULTIDISPLAY DIGITAL SIGNAGE BERBASIS MULTIPLEXER
DOI:
https://doi.org/10.23960/jitet.v12i1.3858Abstract Views: 844 File Views: 800
Abstract
Digital signage is an electronic device that can display information or announcements digitally. The choice of device depends on the characteristics of the place where the digital signage is placed. Restaurants are one of the places where a large number of digital signage is used. The large number of digital signage can extend the display setting time of digital signage displays. The large number of digital signage units used can also affect the number of remotes used, making it less efficient when setting up displays. Therefore, this design is made to make it easier for users to choose which digital signage display they want to set. This design is in the form of a selector module called a multiplexer-based switch selector module. This module consists of a toggle switch, multiplexer, and infrared receiver as the main components and has 4 output channel which can connect with 4 display digital signage. Tests are carried out using 1 digital signage in rotation for each channel. Digital signage display can respond to the signal emitted by the remote via an infrared receiver connected to the module. Therefore, it can be concluded that the switch selector module in the use of remote control can function properly.Downloads
References
A. Mulyana and M. Aria, “PERANCANGAN DIGITAL SIGNAGE SEBAGAI PAPAN INFORMASI DIGITAL”, MIU, vol. 13, no. 2, Dec. 2015.
S. Nasution and Syachrodi, “PINDIT: an Online Digital Signage at Department of Electrical Engineering, University of Riau”, IJEEPSE, vol. 4, Feb., no. 1, pp. 113-120, 2021.
K.P. Ningrum, “Digital Signage: Makna,Strategi Pembuatan Pesan, dan Implementasi oleh Dentsu Agency,” Media Bahasa, Sastra, dan Budaya Wahana, vol.28, Jan., no.1, pp. 624-632, 2022.
N.R. Evandi, N. Ismail, dan H. Fakrurroja, “Rancang Bangun Aplikasi IoT Remote TV Berbasis Realtie Database dan Komunikasi Inframerah,” dalam Prosiding Seminar Nasional Teknik Elektro UIN Sunan Gunung Djati Bandung, Jan., pp. 260-268, 2021.
N. Nasrullah dan M.S. Ramdani, “Simulasi Sistem Lampu Mobil Dinamis Untuk Kenyamanan Berkendara Pada Malam Hari Menggunakan Arduino,” Jurnal Tiarsie, vol. 17, no. 4, pp. 127-136, 2020.
S. Alimsyah dan M. Murdiantoro, “Penerapan Metoda Multiplexing-Demultiplexing Pada Sistem Kelistrikan Mobil,” SINUSOIDA, vol. 23, no. 2, pp. 69-77, 2021.
R. Dinus dan S. M. Situmorang, “Aplikasi Multiplexer Dan Demultiplexer Dalam Pengendalian Beban Listrik,” JURNAL TEKNISI, vol. 1, no. 1, pp. 27-33, 2021.
D. A. Jakaria dan M. R. Fauzi, “Aplikasi Smartphone Dengan Perintah Suara Untuk Mengendalikan Saklar Listrik Menggunakan Arduino,” JURNAL TEKNIK INFORMATIKA (JUTEKIN), vol. 8, no. 1.
T. Valeeprakhon, P. Chaihuadjaroen, C. Chanpilom, dan P. Sroytong, “Automated Single-Pole Double-Throw Toggle Switch Pin using Image Processing and Convolutional Neural Network Techniques,” INTERNATIONAL SCIENTIFIC JOURNAL OF ENGINEERING AND TECHNOLOGY (ISJET), vol. 6, no. 1, pp. 16-27, 2022.
A. E. Mentaruk, X.B. Najoan, dan A. S. Lumenta, “Implementasi Sistem Keamanan Toko Berbasis Internet of Things,” Jurnal Teknik Informatika, vol. 15, no. 4, pp. 325-332, 2020.
S. Rolis, H. Haryanto, K.A. Wibisono, M. Ulum, R. Alfita, “Implmentasi Sistem Pendeteksi Api 360 Derajat Dengan Metode Multiplexer dan Logika Fuzzy Pada Robot Pemadam Api Beroda,” CYCLOTRON, vol. 5, no. 1, 2022.
A. Andang, R. PRIYATNA, dan F.M.S. NURSUWARS, “Multiplikasi Input Analog pada PLC menggunakan Multiplekser IC74HC4067,” ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, dan Teknik Elektronika, vol. 9, no. 4, pp. 813, 2021.
A. Joshi, A. T. Hariram, K. V. Somaiya, dan M. Hussain, “Smart Car Parking System,” International Journal of Engineering Research and Technology, vo. 9, no. 9, pp. 484-487, 2020.
T. ESABUNOR dan A. ATIKPAKPA, “Application of Infra-Red Technology in The Design of a Remote Controlled Electric Ceiling Fan,” Innovative Journal of engineering, vol. 3, no. 3, pp. 55-77, 2022.
