Analisis Keamanan Jarak Antar Alat Penyambung Geser (Shear Connector) Berdasarkan Distribusi Tegangan Dengan Menggunakan Metode Elemen Hingga

Aditia Reshi Dista, Suyadi Suyadi, Masdar Helmi

Abstract


The function of the shear connector is to keep concrete plate oriental position. The installation of the shear connector will influence the distribution of the stress spread in unevenly on concrete plate. This research aims to analyse the safe distance of shear connector based on distribution of stress in concrete plate.  This research used software SAP2000 version 14 to find maximum stress on beam then the stress in the plate was analysed by finite element method and Microsoft Excel used base on Kirchoff-Love theories. The analysis result show that maximum stress was located in the middle of span near the support (shear connector). If position of the shear connector not accord with SNI-1729-2015, the plate can crack due to the exceed of modulus concrete crack (fr). The risk of failure increased as line with the wider shear connector distance due to overpass of crack stress.

Keywords : Stress, shear connector, plate, finite elemen method, SAP2000.


References


Brahmantyo, Dody. 2012. Struktur Baja MK. Universitas Narotama. Surabaya.

CSI. 1995. Computers and Structures. University Avenue. California.

Ghali, A. 1977. Analisis Struktur Gabungan Metode Klasik dan Matriks. Erlangga. Jakarta.

Gunawan, Rudi. 1993. Tabel Profil Konstruksi Baja. Kanisius. Yogyakarta.

Handayanu. 2011. Metode Elemen Hingga. Institut Teknologi Surabaya. Surabaya.

Kaskus. 2011. Komunitas Pengguna SAP2000, Etabs, dan SAFE. https://www.kaskus.co.id/thread//komunitas-pengguna-sap2000-etabs-dan-safe-recommended-civil-engineering/12 (diakses tanggal 9 Desember 2016)

Katili, Irwan. 2004. Metode Elemen Hingga untuk Pelat Lentur. Universitas Indonesia. Jakarta.

Nasution, Thamrin. 2012. Struktur Baja II. Institut Teknologi Medan. Medan.

Pawirodikromo, Widodo. 2014. Analisis Tegangan Bahan. Pustaka Pelajar. Yogyakarta.

Pramana, Sangga. 2010. Belajar tentang balok dan pelat beton bertulang (untuk pemula). https://sanggapramana.wordpress.com/2010/07/30/belajar-tentang-balok-dan-pelat-beton-bertulang-untuk-pemula/ (diakses tanggal 20 Maret 2016)

Pramana, Sangga. 2010. Pelat Beton Bertulang Pemula. https://sanggapramana.wordpress.com/2010/08/02/pelat-beton-bertulang-pemula/ (diakses tanggal 22 September 2016).

Pujianto, As’at. 2011. Struktur Komposit Dengan Metode LRFD.

https://ekhalmussaad.files.wordpress.com/2011/03/7-komposit.doc (diakses tanggal 16 Juli 2016).

SNI-2847-2013. Persyaratan Beton Struktural untuk Bangunan Gedung, Departemen Pekerjaan Umum.

SNI-1727-2013. Beban Minimum untuk Perancangan Bangunan Gedung dan Struktur Lain, Departemen Pekerjaan Umum.

SNI-1729-2015. Spesifikasi untuk Bangunan Gedung Baja Struktural, Departemen Pekerjaan Umum.

Studcraft, 2015. Shear Connectors. http://www.studcraft.com/prod_shear_connectors.html (diakses tanggal 12 November 2016).


Refbacks

  • There are currently no refbacks.


ISSN: 2303-0011