Kajian Eksperimental Unjuk Kerja Model Sistem Pembangkit Listrik Menggunakan Turbin Helik Bentuk Sudu NACA 0033

Authors

  • J B Sinaga Jurusan Teknik Mesin Universitas Lampung
  • A Suudi Jurusan Teknik Mesin Universitas Lampung
  • M D Susila Jurusan Teknik Mesin Universitas Lampung
  • R Admiral Jurusan Teknik Mesin Universitas Lampung
  • S Sugiman Jurusan Teknik Mesin Universitas Lampung

DOI:

https://doi.org/10.23960/mech.v14i2.3727

Abstract Views: 181 File Views: 92

Keywords:

power plants, turbine

Abstract

This paper presents an experimental study of a power generation system model that uses a helical turbine with NACA 0033 blades. The helical turbine has a diameter of 1 meter, a length of 1.2 meters, and three blades. Each blade has a chord length of 41.8 cm and an inclination angle of 62 degrees. Tests were conducted to harness the water flow energy in the Way Tebu irrigation canal in Banjar Agung Udik Village, Tanggamus Regency. The test results show that the power generation system model, operating at water flow velocities of 0.398 m/s, 0.491 m/s, and 0.548 m/s, generates electrical power outputs of 13.705 W, 20.987 W, and 34.63 W, with corresponding efficiencies of 36.22%, 32.74%, and 34.67%.

Keywords: power plants helical turbine kinetic energy

Downloads

Download data is not yet available.

References

-----., 2018, “Tidak Ada Desa Gelap”, Radar Lampung. 16 September 2018.

-----,”Vertical axis wind turbine’’ Wikimedia Foundation, Inc. available at: https://en.wikipedia.org/wiki/Vertical_axis_wind_turbine), diakses tanggal 30 Juli 2020.

Gorlov, A.,2008, “Development of The Helical Reaction Turbine”. Final Technical Report, available at: www.mainetidalpower.com/files/gorlovrevised.pdf, diakses tanggal 10 Juli 2020.

Sinaga, J. B., Suudi, A., dan Susila, M. D.,2020, “Kajian Eksperimental Unjuk Kerja Turbin Helik Bentuk Sudu NACA 0033 untuk Sistem Pembangkit Listrik”, Prosiding Seminar Nasional Hasil Penelitian & Pengabdian Kepada Masyarakat 2020 Univ Pamulang, 6-7 Oktober 2020.

Sinaga, J. B., Suudi, A., dan Susila, M. D., 2017, “Optimasi Unjuk Kerja Sistem Pembangkit Listrik Tenaga Mikro Hidro (PLTMH) Menggunakan Turbin Ultra Low Head untuk Memenuhi Listrik di Daerah Pedesaan Provinsi Lampung”, Laporan Penelitian Produk Terapan.

Supramanto, D. W.,2016, “Kajian Eksperimental Pengaruh Jumlah Sudu terhadap Unjuk Kerja Turbin Helik untuk Model Sistem Pembangkit Listrik Tenaga Mikro Hidro (PLTMH)”, Tugas Akhir Teknik Mesin, Universitas Lampung, Bandar Lampung.

Shiono, M., K. Suzuki, dan S. Kiho, 2002,” Output Characteristics of Darrieus Water Turbine with Helical Blades for Tidal Current Generations”, Proceedings of The Twelfth International Offshore and Polar Engineering Conference Kitakyushu, Japan, May 26–31, 2002.

Downloads

Published

2023-11-03

How to Cite

Sinaga, J. B., Suudi, A., Susila, M. D., Admiral, R., & Sugiman, S. (2023). Kajian Eksperimental Unjuk Kerja Model Sistem Pembangkit Listrik Menggunakan Turbin Helik Bentuk Sudu NACA 0033. MECHANICAL, 14(2), 188. https://doi.org/10.23960/mech.v14i2.3727

Issue

Vol. 14 No. 2 (2023): Jurnal Mechanical

Section

Articles

License

Creative Commons License
MECH is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.